Archive for the Specifications Category

SFI Meeting Schedule at 2019 PRI Show

Each year in December, the SFI Foundation, Inc. (SFI) holds several of its specification review meetings during the Performance Racing Industry (PRI) Trade Show in Indianapolis, Indiana. This year, SFI will hold two days of committee meetings on Thursday, December 12th and Friday, December 13th in meeting

Read more

SFI Featured in PRI Magazine Article

Performance Racing Industry recently published an article in their PRI Magazine that features SFI Foundation and how our Minimum Performance Standard Program benefits the motorsports industry. Please CLICK HERE to enjoy reading Setting the Standard by Steve Statham in the August, 2019 edition of PRI Magazine.

Read more

SFI Meeting Schedule at PRI Show 2018

Each year in December, the SFI Foundation, Inc. (SFI) holds several of its specification review meetings during the Performance Racing Industry (PRI) Trade Show in Indianapolis, Indiana. This year, SFI will hold three days of committee meetings on Thursday, December 6th through Saturday, December 8th in meeting

Read more

SFI Chassis Spec 2.3R Tech Advisory

The SFI Nitro Chassis Committee has issued a technical advisory for SFI Chassis Specification 2.3R for rear engine dragster chassis structure (top fuel); 4.99 seconds E.T. & quicker, effective January 16, 2018. The document can be viewed or downloaded from the SFI Tech Advisories page.  

Read more

SFI Transitioning to New Labels for Driver Restraints and Window Nets/Roll Cage Nets for 2017

Beginning in 2017, SFI Foundation, Inc. (SFI) is changing the way its labels for Driver Restraints, Window Nets, and Roll Cage Nets are dated. SFI is implementing a New Label design which will remove the punched-out month/year date of manufacture and instead incorporate a single expiration date pre-printed

Read more

NOTICE OF COUNTERFEIT DRIVER’S GEAR

The photos below are examples of recently discovered counterfeit SFI conformance labels attached to shoes and driver suits fraudulently represented as being certified to SFI specifications. These were found on non-major brand equipment utilizing off-shore 3rd party manufacturers. Please compare the certification labels on your own race

Read more

New SFI Chassis Spec 25.6 for Fast, Heavy Trucks

As the world of drag racing evolves and racers push the limits of performance, SFI was approached by several of its sanctioning body members and asked to develop a minimum roll cage specification for fast, heavy drag race vehicles. These vehicles can run the quarter mile at low

Read more

SFI Chassis Spec 25.5C Revision

The SFI Spec 25.5 has been revised, effective May 12, 2015. The newly revised version is designated as SFI Spec 25.5C and is for Full Bodied Car Stock or Modified/OEM Floorpan and Firewall with OEM Frame or Uni-Body Construction – 7.50 to 8.49 Seconds; 3,600 lbs. Maximum.

Read more

SFI Specs 25.1G, 25.4B, 25.5B Revised

The SFI Chassis Specs 25.1G, 25.4B, and 25.5B for Full Bodied Car Drag Race Roll Cages have been revised, effective April 8, 2014. The revised versions are available from SFI for immediate use by sanctioning bodies and chassis builders. The extent of this revision is the addition of

Read more

SFI Spec Revisions Follow Review Meetings Held at PRI Show

December of each year, SFI Foundation holds specification review meetings during the PRI Show because the venue is convenient for many of our participating manufacturers and others who would like to attend these committee meetings. The specs are reviewed on a regular basis to ensure they remain

Read more

Location



SFI Foundation Inc.
15708 Pomerado Road
Suite N208
Poway, CA 92064

Phone: (858) 451-8868
Email: sfi@sfifoundation.com

Disclaimer



All text, images, logos and information contained on this website are the intellectual property of SFI Foundation unless otherwise registered and are protected under the U.S. Copyright Act 17 U.S.C. 101-810.